Creating an Internal Location

Going back to the list of locations. You now need to create all the internal locations that belongs in your parent location.  Please see below example of all the parent locations that will need to be created.

You can duplicate each location just as done in the parent location example. Click into the location you will like to duplicate.

Click More and Select Duplicate OR Click Create if you don’t wish to duplicate

Location Name For internal locations this will either Disposal, Output, Refurbished, Repaired, Stock, To Refurbish, To Repair

Parent Location Please make sure that you have selected the correct parent location.

Code Please enter a code for the location (this is usually specified by Guillaume)

Stock Location Level indicates the type of location level, you will need to select the stock location level from Country, Zone, Organisation Unit and Location

Location Type Please select Internal Location

Please click Save

Please repeat this process for the other remaining internal locations.