Skip to end of banner
Go to start of banner

Configure Technitian Visit n ERP

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Background : 
It has appeared that on some new NGUs, there is a mistake whereby the technician visit is not well configured.
This resulted in a missing button during the recording of a technician visit action on both ERP and Pulse. 

This action can only be performed by the following roles:

  • IT Support
  • Call Center Supervisor
  • Customer Service Manager

  1. How to enable missing button: 

    GO to CRM -→ Configurations → CRM Config → Technician Visit → Max. number of technician visits per ticket and set it with a Number. 

        2. What Happen when not configured: 

There will be a missing button during the recording of a technician visit action on both ERP and Pulse

    After the fix 

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

BBOXX