Home Pulse: Bulk State Change
- Olanike Dairo (Unlicensed)
These features can be used to make a bulk change state, it can save a lot of time for the repair supervisor.
This Module can be done by the Repair Technician
How to use:
Navigate to form selector in the header in the pulse web app
Select Bulk state change
Click on the scanned image
Scan the barcode or QR code of the serial numbers of the units. (Repair Supervisor has barcode scanner device)
Scanned serial numbers appear in the input field and then on the table one by one. [If not try putting the cursor on the input box first and then scan the serial number]
After a few seconds, the current state will be updated in the table for the records.
Maximum 10 records can appear in the table
You can delete a record by clicking the cross icon at the end of the row or you can delete everything by clicking on “Remove All“
Select the state you want to change to from the dropdown in the top right corner of the page.
Once the operation is done, the right-hand most column will be updated with the new state if it is a success or it will show a failure message if it failed.
After the state change of the first bulk of 10 records, you can clear the table by clicking on “Remove All” and go ahead with scanning the next set of 10.
